Test Setup
We tested the Okeanos RC-1402 CPU Cooler for sound and cooling performance using an i7 LGA2011-v3 set up. We tested two configurations, stock and overclock both with turbo. The i7 LGA2011-v3 set up is basically a high end set up that will stress the CPU cooler under stock load conditions and when overclocked.
- Operating System: Windows 10 Pro 64-bit
- Processor: Intel i7-5820K
- Motherboard: Asus Rampage V Extreme
- Graphics: MSI GTX 970 GAMING Twin Frozr V
- Memory: 16GB Crucial Ballistix Sport DDR4 @2666Mhz
- Drives: Crucial BX100 500Gb SSD
- PSU: Corsair HX1000i
- Chassis: MicroCool Banchetto 101
Software used for load tests and temperature capture;
- HWiNFO64
- AIDA64 Engineer
We ran the AIDA64 Engineer stability test in 30 minute batches and recorded the results. We used the Core Max result as there was typically a variance across the cores of a couple of degrees.
We only selected the cache, FPU and CPU tests, so no other component would generate impacting heat during the tests. We always “run in” our CPU cooler installations, essential to maximizing the performance of the cooler before testing begins.
BIOS Setting
We used the default PWM setting for the testing.
Sound Level Testing
We used a standard generic digital sound level meter at 15 inches. It is important to note we used the MicroCool Banchetto 101 Chassis for testing which is an open chassis. This means you are hearing the CPU coolers fan unobstructed.
Thermal Paste
We use Arctic MX-2 for all heatsink cooler tests and in fact we use it for all builds, test or otherwise. We run the AIDA64 Engineer stability test as our burn in programme for thermal paste, which allows the paste to spread out and share the love across the mating surfaces. It is worth doing, we always notice a drop in temperatures after 30 minutes of burn in.
Reeven Okeanos RC-1402 CPU Cooler Review
Package - 8
Performance - 8.5
Price - 8.5
Consumer Experience - 8.5
8.4
Another recommended cooler, it's getting tough to pick between them these days. What does this CPU cooler mean to the market and to the enthusiast that will make the difference? Well, it's a relatively new name on the market for flagship coolers. The design may be more appealing and the detail may work for your system.
